Madeyes06
|
Madeyes [2006] Madeyes was inspired from the Nano and the builders experience in kite manufacture. The profile is a modifiation of a paraglider profile.
It was designed with Surfplan and then Autocad for bridle and skin modifications. materials used is common NCV skytex 9017
Manufacture: Madeyes |
Technical Data
| Model | 13m² | |||
| Area (Flat/Projected) | 13m²/?m² | |||
| Wing Span (Flat/Projected) | ?m/?m | |||
| Chord (max/min) | ?m/?m | |||
| Aspect Ratio (Flat/Projected) | 3.8 | |||
| No. of Cells | 18 | |||
| Wing Material | NCV skytex 9017 | |||
| Weight | ?kg | |||
| Glide Ratio | ?:1 | |||
| Trim Speed/Top Speed | ?km/h/?km/h | |||
| Recommended Fly weight (kg) | ? | |||
Photos - Best of...
|
Click above images to view full size versions... |
Pilot/Rider Reviews & Other Details...
|
Madeyes Short videos of the wing: http://www.youtube.com/watch?v=S6X_wCnJ4Zw http://www.youtube.com/watch?v=XXCVtaC-p6M - Profile plotting -preparing for the next design. |
- Login or register to post comments
- Email this page
- Printer-friendly version
- 600 reads
Correction?
Hi Folks, is it possible to correct the table?
the AR is 3.8
Well, thinks it's time for an update, Madeyes II Proto will come at end of winter, I thinks.
check for update on the Blog
I'ld like to post new photos
I'ld like to post new photos and technical data, who to contact?
thanks!